Brief overview
This product is a water-based cleaning agent composed of surfactant, detergent and special corrosion inhibitor. It has strong penetration and cleaning function. It is specially used for cleaning of oil, dirt and various impurities of aluminium alloy, with less dosage, thorough cleaning and fast time. The products after cleaning are glossy, colourless, non-oxidizing and non-rusting.
Main indicators
| Appearance | liquid |
| colour | Light yellow or yellow |
| PH value (3% aqueous solution) | 8.80～9.20 |
| Corrosion test (40+2oC 8h full impregnation) | LY12 Aluminum Class I |
| Rust-proof property (cast iron, 35 C 2 C, RH > 95%, single sheet 24h, laminated sheet 8h) | Class A |
| Cleaning rate，% ＞ | 95 Oil pollution |
Matters needing attention：
1. Use method can be soaked, brushed, mechanical cleaning, oil removal at room temperature, if need to accelerate the speed of oil removal, can be heated to 60oC-70oC.
2. Use concentration is 1:30
3. The use period depends on the degree of oil pollution and the use of oil. In general, the working fluid should be replaced or replaced when the effect of decontamination is significantly reduced.
Responsible care:
For operation, storage, transportation and safety information, please refer to MSDS and PDS products, which can be directly logged on to WWW. FANCHU. COM. Or scan the two-dimensional code at the bottom left of the page to focus on "Fanchu Lubrication" public Wechat for more information.
